RGB & RGBW LED Strip Lights
Color-changing LED strip from classic 5050 RGB, RGBW(4-in-1), RGBWW(5-in-1), to dot-free COB RGB and RGB+CCT — with dedicated-white RGBW options for true white output.
Our color-changing strip program spans 5050 SMD and dot-free COB constructions in RGB, RGBW and RGBCW (4 channels), RGBWW 5-in-1 and RGB+CCT (5 channels) configurations, on 5V, 12V, and 24V. Every multicolor series uses analog color control — for pixel-level effects, see our Addressable line. Dedicated white channels render at Ra≥90 for true functional white, and waterproof versions are available through our Outdoor line. UL Listed options are available, with documentation for your submittal package.
Why contractors spec our color-changing strip
Full color mixing
Saturated multicolor scenes from analog RGB channels.
Dedicated-white RGBW options (Ra≥90)
A fourth white chip for true functional white, not a tinted blend.
Dot-free COB RGB
Up to 896 LEDs/m — continuous color with no visible pixels.
RGB + tunable white
Color scenes and 2700–6500 K white on one strip, one controller.
5V · 12V · 24V
Voltage matched to the run — from short details to full rooms.
UL Listed options available
Certification held by the original manufacturing partner. Documentation available upon request.
Four color families, one spec conversation
RGB (5050 SMD)
Classic 5050 RGB LED strip for pure color scenes — three densities on 12V and 24V, controlled by any standard 3-channel (4-pin) RGB controller.
| Model | LEDs/m | Color config | Voltage |
|---|---|---|---|
| UT-R30-10 | 30 | RGB | 12V / 24V |
| UT-R60-10 | 60 | RGB | 12V / 24V |
| UT-R96-12 | 96 | RGB | 24V |
RGBW(4-in-1) & RGBWW(5-in-1)
A dedicated white chip alongside the color emitters — true white at Ra≥90 for spaces that switch between color scenes and functional lighting.
| Model | LEDs/m | Color config | Voltage |
|---|---|---|---|
| UT-RW60-12 | 60 | RGBW | 12V / 24V |
| UT-RW84-12 | 84 | RGBW | 24V |
| UT-RW96-12 | 96 | RGBWW | 24V |
COB RGB (Dot-Free)
Color changing without pixels — COB construction carries up to 896 LEDs per meter under a continuous phosphor line, so color reads as an unbroken band.
| Model | LEDs/m | Color config | Voltage |
|---|---|---|---|
| UT-R576-10 | 576 | RGB | 12V / 24V |
| UT-R576-8-LV | 576 | RGB | 5V |
| UT-R840-10 | 840 | RGB | 12V / 24V |
| UT-R630-8-SV | 630 | RGB side-view | 24V |
| UT-RW784-12 | 784 | RGBW | 24V |
| UT-RW896-12 | 896 | RGBW | 24V |
| UT-RCW840-12 | 840 | RGBCW | 24V |
RGB+CCT
Five channels on one strip: full RGB color plus tunable white from 2700 to 6500 K — one run covers both the evening event and the workday.
| Model | LEDs/m | Color config | Voltage |
|---|---|---|---|
| UT-RCCT72-12 | 72 | RGB + tunable white | 24V |
| UT-RCCT90-12 | 90 | RGB + tunable white | 24V |
Master spec table
Representative models across all four families. Full photometric files and IES data ship with your quote.
How to read our model numbers: UT-R{LEDs per meter}-{PCB width mm}; prefixes: R RGB · RW RGBW/RGBWW · RCW RGBCW · RCCT RGB+CCT; suffixes: SV side-view · LV 5V low-voltage · CSP chip-scale package.
Tap a row for full specs.
| Model | LEDs/m | Construction | Color config | Power W/ft (W/m) | White CRI | Voltage | Cut increment | Max run | IP rating |
|---|---|---|---|---|---|---|---|---|---|
| UT-R30-10 | 30 | 5050 SMD | RGB | 2.1 W/ft (7 W/m) | — | 12V / 24V | 3.94 in (100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-R60-10 | 60 | 5050 SMD | RGB | 4.3 W/ft (14 W/m) | — | 12V / 24V | 1.97/3.94 in (50/100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-R96-12 | 96 | 5050 SMD | RGB | 7.0 W/ft (23 W/m) | — | 24V | 2.46 in (62.5 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW60-12 | 60 | 5050 SMD | RGBW | 5.8 W/ft (19 W/m) | W: Ra≥90 | 12V / 24V | 3.94 in (100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW84-12 | 84 | 5050 SMD | RGBW | 5.8 W/ft (19 W/m) | W: Ra≥90 | 24V | 2.81 in (71.4 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW96-12 | 96 | 5050 SMD | RGBWW | 7.0 W/ft (23 W/m) | W: Ra≥90 | 24V | 2.46 in (62.5 mm) | 16 ft (5 m)/feed | IP20 |
| UT-R576-10 | 576 | COB · dot-free | RGB | 4.3 W/ft (14 W/m) | — | 12V / 24V | 1.23/2.46 in (31.25/62.5 mm) | 16 ft (5 m)/feed | IP20 |
| UT-R576-8-LV | 576 | COB · dot-free | RGB | 2.1 W/ft (7 W/m) | — | 5V | 0.82 in (20.83 mm) | 6.5 ft (2 m)/feed | IP20 |
| UT-R840-10 | 840 | COB · dot-free | RGB | 4.3 W/ft (14 W/m) | — | 12V / 24V | 1.31/1.97 in (33.33/50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-R630-8-SV | 630 | COB · side-view | RGB side-view | 3.0 W/ft (10 W/m) | — | 24V | 1.31 in (33.33 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW784-12 | 784 | COB · dot-free | RGBW | 5.8 W/ft (19 W/m) | W: Ra≥90 | 24V | 2.81 in (71.42 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW896-12 | 896 | COB · dot-free | RGBW | 5.8 W/ft (19 W/m) | W: Ra≥90 | 24V | 2.46 in (62.5 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RCW840-12 | 840 | COB · dot-free | RGBCW | 6.4 W/ft (21 W/m) | W: Ra≥90 | 24V | 1.41 in (35.71 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RCCT72-12 | 72 | 5050 RGB + 2835 CCT | RGB + tunable white | 5.8 W/ft (19 W/m) | W: Ra≥90 | 24V | 3.94 in (100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RCCT90-12 | 90 | 5050 RGB + 2835 CCT | RGB + tunable white | 6.4 W/ft (21 W/m) | W: Ra≥90 | 24V | 3.28 in (83.3 mm) | 16 ft (5 m)/feed | IP20 |
| UT-RW840-12-CSP | 840 | CSP · chip-scale · high-density · 12mm | RGBW | 6.4 W/ft (21 W/m) | W: Ra≥90 | 24V | 1.97 in (50 mm) | 16 ft (5 m)/feed | IP20 |
Where color-changing strip earns its keep
Hospitality Mood Lighting
Bars, lobbies, and restaurants where saved color scenes shift the room by daypart.
Feature Walls & Coves
Coves and feature walls that move through the full spectrum plus a dedicated white channel.
Retail Brand Color
Displays and storefronts tuned to brand color, with RGBW for clean pastels and true white.
Entertainment & Leisure
Clubs, gyms, and leisure venues needing dynamic color on a continuous, diffused line.
Certifications
Products are sourced from qualified manufacturing partners and are available with UL Listed, ETL Listed, FCC compliant, RoHS compliant and other applicable configurations. Certification coverage varies by model. Certification is held by the original manufacturing partner. Documentation and listing information are available upon request.
CE-compliant options available for buyers outside North America — contact us for EU specifications.
Related guides
Specification, power and installation guides for this range.
Related projects
Projects that use this range.
RGB & RGBW questions
Can RGB LED strip make white light?
Technically yes, but RGB-mixed white is a cool, tinted blend with poor color rendering. For functional white lighting, specify RGBW or RGBCW — the dedicated white chip delivers true white at Ra≥90. RGB-only strip is best reserved for pure color scenes.
What is the difference between RGB and RGBW?
RGBW adds a fourth, dedicated white chip to the red, green, and blue emitters. That fourth channel produces true white at CRI 90+ instead of a tinted RGB blend. Installations that alternate between color scenes and everyday white lighting should always spec RGBW or RGBCW.
Should I choose 12V or 24V RGB strip?
24V for most installations: it halves the current for the same wattage, so wire and connectors carry less and colors stay even along the run. 12V suits short accents and systems that already run on 12V. The 5V COB RGB series is for short detail runs up to 6.5 ft (2 m).
How do I cut RGB LED strip?
Cut only at the marked points, straight across the printed line. Cut units range from 0.82 in (20.83 mm) on 5V COB RGB to 3.94 in (100 mm) on 5050 RGB — check the spec table for each model. Use 4-, 5-, or 6-pin connectors matched to the color configuration when rejoining.
Do I need a controller — and which one?
Yes — every color-changing strip needs a controller matched to its channel count: 3 channels (4 pins) for RGB, 4 channels (5 pins) for RGBW and RGBCW, 5 channels (6 pins) for RGBWW and RGB+CCT. We pair the controller and driver at quote time from our Drivers, Controllers & Connectors line.
How do I size the power supply for RGBW strip?
Use the W/ft in the spec table, which is the figure with every channel at full output, multiply by the run length, and keep the load at or below 80% of the driver's rating. Each run still follows the table's max run per feed.
Is waterproof RGB strip available?
Yes — RGB and RGBW configurations are available in IP65–IP68 constructions through our Outdoor & Waterproof line. The strip, connectors, and driver are specified together as one system, and the wet location marking is confirmed per model at quote.
Spec your RGB/RGBW project
Send your project details — an engineer replies with matched strip, drivers, and documentation.
We typically respond within 24 hours. No spam, ever.