Single Color SMD LED Strip Lights
White and single-color SMD strip from 2835 workhorses to CRI 98 full-spectrum — 30 to 480 LEDs per meter, high-efficacy options up to 190 lm/W.
Our single-color SMD LED strip light program spans six packages — 2835, 5050, 2022, 3838, 3014, and 2216 — at 30 to 480 LEDs per meter. Color quality comes in three tiers: Ra≥90 standard, Ra≥95, and Ra≥98 full-spectrum, with high-efficacy tape light reaching 190 Lumens per watt: how much light the strip gives for the power it draws. Higher means less heat and less driver load per foot. where energy codes drive the spec. Choose 12V or 24V, or 48V and constant-current designs for long single-feed runs, plus S-shape, side-view, and ultra-narrow form factors. UL Listed options are available, with documentation for your submittal package.
Why contractors spec our SMD tape light
CRI up to 98 (full spectrum)
Three tiers — Ra≥90 standard, Ra≥95, and Ra≥98 full-spectrum.
High efficacy to 190 lm/W
Energy-code-driven specs met without sacrificing CRI.
2835 · 5050 · six packages
The right chip size for every density and output target.
S-shape & side-view options
Zigzag PCB for curves and letters; edge emission for profiles.
48V & constant-current long runs
Single feeds of 49–65 ft (15–20 m) — no mid-run injection.
UL Listed options available
Certification held by the original manufacturing partner. Documentation available upon request.
When to spec something else
A dot-free line with no diffuser
SMD packages sit at a fixed pitch, and the pitch sets how visible the dots are.
COB LED strip, a continuous dot-free lineOne feed for a long run
Standard 12V/24V strip runs 16 ft (5 m) per feed before voltage drop becomes visible.
Long-Run series: 48V to 49 ft (15 m), 24V constant current to 65 ft (20 m)A standard power supply on CC strip
Our constant-current model (UT-S2835-140-CC) does not run on a constant-voltage 24V supply.
A matched constant-current driver, specified on your quote
Wet or outdoor locations
The models in the tables are IP20, for dry indoor locations only.
Outdoor & waterproof strip, IP65–IP68Color scenes or pixel effects
The strips on this page are single-color.
RGB & RGBW or addressable stripBending flat around a curve
Standard PCB bends up and down, not sideways.
S-shape zigzag PCB, bends flat around curves and letterformsSix SMD families, one spec conversation
2835 LED Strip
The workhorse single-color package — six densities from general cove work to CRI 98 full-spectrum, including high-efficacy versions to 190 lm/W.
| Model | LEDs/m | Package | CRI | Voltage |
|---|---|---|---|---|
| UT-S2835-60 | 60 | 2835 | Ra≥90 | 12V / 24V |
| UT-S2835-120 | 120 | 2835 | Ra≥90 | 12V / 24V |
| UT-S2835-240 | 240 | 2835 | Ra≥90 | 24V |
| UT-S2835-128-HE | 128 | 2835 high efficacy | Ra≥90 | 24V |
| UT-S2835-240-HE | 240 | 2835 high efficacy | Ra≥90 | 24V |
| UT-S2835-480-FS | 480 | 2835 full spectrum | Ra≥98 | 24V |
5050 LED Strip
More output per chip at lower densities — the classic large package for bright single-color accents.
| Model | LEDs/m | Package | CRI | Voltage |
|---|---|---|---|---|
| UT-S5050-30 | 30 | 5050 | Ra≥90 | 12V / 24V |
| UT-S5050-60 | 60 | 5050 | Ra≥90 | 12V / 24V |
| UT-S5050-120 | 120 | 5050 | Ra≥90 | 24V |
2022 & 3838 (New Packages)
Newer chip packages: 2022 packs high density into a compact footprint; 3838 carries CCT capability inside a single package.
| Model | LEDs/m | Package | CRI | Voltage |
|---|---|---|---|---|
| UT-S2022-160 | 160 | 2022 high dense | Ra≥90 | 24V |
| UT-S3838-120 | 120 | 3838 CCT-capable | Ra≥90 | 24V |
3014 & 2216
Specialty packages — 3014 is a side-emitting package for edge-lit profiles; 2216 runs 300 LEDs per meter at Ra≥95 for tight, high-CRI detail.
| Model | LEDs/m | Package | CRI | Voltage |
|---|---|---|---|---|
| UT-S3014-120-SV | 120 | 3014 side-view | Ra≥90 | 12V / 24V |
| UT-S2216-300 | 300 | 2216 | Ra≥95 | 24V |
Special Form
Form factors for geometry standard strip cannot follow — S-shape zigzag PCB bends flat around curves and letterforms; ultra-narrow fits 4/5 mm reveals.
| Model | LEDs/m | Form | CRI | Voltage |
|---|---|---|---|---|
| UT-S2835-120-SS | 120 | S-shape (zigzag) | Ra≥90 | 12V / 24V |
| UT-S2835-120-UN | 120 | ultra-narrow 4/5 mm | Ra≥90 | 12V / 24V |
Long-Run
48V and 24V constant-current designs feed 49–65 ft (15–20 m) from a single end — one driver per corridor, no mid-run injection. The constant-current (CC) models need a constant-current driver.
| Model | LEDs/m | Package | Voltage | Max run |
|---|---|---|---|---|
| UT-S2835-160-48V | 160 | 2835 | 48V | 49 ft (15 m) single feed |
| UT-S2835-140-CC | 140 | 2835 | 24V constant current | 65 ft (20 m) constant current |
Full Spectrum (High Density)
The premium full-spectrum tier — CRI ≥95 with R1–R15 ≥90, and TM-30-15 fidelity Rf 94–95 / gamut Rg 101. For retail, galleries, studios, and food display. CCT 2700K / 3000K / 4000K.
| Model | LEDs/m | CRI | Power W/ft (W/m) | Efficacy | Width | Cut increment | Voltage |
|---|---|---|---|---|---|---|---|
| UT-SFS80-8 | 80 | Ra≥95 | 1.5 W/ft (4.8 W/m) | 160-183 lm/ft (528-600 lm/m) | 8mm | 1.97 in (50 mm) | 24V |
| UT-SFS160-8 | 160 | Ra≥95 | 2.9 W/ft (9.6 W/m) | 307-365 lm/ft (1008-1200 lm/m) | 8mm | 1.97 in (50 mm) | 24V |
| UT-SFS80-10 | 80 | Ra≥95 | 4.4 W/ft (14.4 W/m) | 439-483 lm/ft (1440-1584 lm/m) | 10mm | 3.94 in (100 mm) | 24V |
| UT-SFS160-8-HO | 160 | Ra≥95 | 5.9 W/ft (19.2 W/m) | 585-702 lm/ft (1920-2304 lm/m) | 8mm | 3.94 in (100 mm) | 24V |
Master spec table
All single-color SMD models in one table. Full photometric files and IES data ship with your quote.
Specs reviewed
How to read our model numbers: UT-S{package}-{LEDs per meter}; suffixes: HE high efficacy · FS full spectrum CRI 98 · SV side-view · SS S-shape · UN ultra-narrow · 48V · CC constant current.
Tap a row for full specs.
| Model | LEDs/m | Package · Width | Power W/ft (W/m) | CRI | CCT | Voltage | Cut increment | Max run | IP rating |
|---|---|---|---|---|---|---|---|---|---|
| UT-S2835-60 | 60 | 2835 · 8mm | 1.5 W/ft (4.8 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 1.97/3.94 in (50/100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-120 | 120 | 2835 · 10mm | 4.4 W/ft (14.4 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 0.98/1.97 in (25/50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-240 | 240 | 2835 · 10mm | 6.7 W/ft (22 W/m) | Ra≥90 | 2700-6500K | 24V | 0.98 in (25 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-128-HE | 128 | 2835 · 10mm · high efficacy (190 lm/W) | 2.9 W/ft (9.6 W/m) | Ra≥90 | 2700-6500K | 24V | 2.46 in (62.5 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-240-HE | 240 | 2835 · 10mm · high efficacy | 5.9 W/ft (19.2 W/m) | Ra≥90 | 2700-6500K | 24V | 1.31 in (33.3 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-480-FS | 480 | 2835 · 10mm · full spectrum | 5.5 W/ft (18 W/m) | Ra≥98 | 2700-6500K | 24V | 0.98 in (25 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S5050-30 | 30 | 5050 · 10mm | 2.2 W/ft (7.2 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 3.94 in (100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S5050-60 | 60 | 5050 · 10mm | 4.4 W/ft (14.4 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 1.97/3.94 in (50/100 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S5050-120 | 120 | 5050 · 12mm | 7.0 W/ft (23 W/m) | Ra≥90 | 2700-6500K | 24V | 1.97 in (50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2022-160 | 160 | 2022 · 10mm · high dense | 4.3 W/ft (14 W/m) | Ra≥90 | 2700-6500K | 24V | 0.98 in (25 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S3838-120 | 120 | 3838 · 10mm | 4.9 W/ft (16 W/m) | Ra≥90 | CCT 2700-6500K | 24V | 1.97 in (50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S3014-120-SV | 120 | 3014 · 8mm · side-view | 2.9 W/ft (9.6 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 1.97 in (50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2216-300 | 300 | 2216 · 10mm | 5.8 W/ft (19 W/m) | Ra≥95 | 2700-6500K | 24V | 0.98 in (25 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-120-SS | 120 | 2835 · 8mm · S-shape (zigzag) | 2.9 W/ft (9.6 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 1.97 in (50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-120-UN | 120 | 2835 · 4/5mm · ultra-narrow | 2.9 W/ft (9.6 W/m) | Ra≥90 | 2700-6500K | 12V / 24V | 0.98/1.97 in (25/50 mm) | 16 ft (5 m)/feed | IP20 |
| UT-S2835-160-48V | 160 | 2835 · 10mm | 4.4 W/ft (14.4 W/m) | Ra≥90 | 2700-6500K | 48V | 1.97 in (50 mm) | 49 ft (15 m) single feed | IP20 |
| UT-S2835-140-CC | 140 | 2835 · 10mm | 3.7 W/ft (12 W/m) | Ra≥90 | 2700-6500K | 24V constant current | 1.97 in (50 mm) | 65 ft (20 m) constant current | IP20 |
Where single-color SMD earns its keep
Cove & Perimeter
The cost-efficient spec for diffused coves and perimeter slots where the strip sits behind a lens.
Under-Cabinet & Task
High-CRI task light over counters and work surfaces that renders food and finishes accurately.
Signage & Backlighting
Dense 240–480 LEDs/m fills channel letters, light boxes, and evenly backlit panels behind diffusion.
Retail & Display
Ra≥95 and Ra≥98 tiers keep merchandise, artwork, and food color honest in cases and on shelves.
Certifications
Products are sourced from qualified manufacturing partners and are available with UL Listed, ETL Listed, FCC compliant, RoHS compliant and other applicable configurations. Certification coverage varies by model. Certification is held by the original manufacturing partner. Documentation and listing information are available upon request.
CE-compliant options available for buyers outside North America — contact us for EU specifications.
Related guides
Specification, power and installation guides for this range.
SMD LED strip questions
What does "5050" or "2835" mean on an LED strip?
The four digits are the chip’s physical dimensions in millimeters — a 2835 chip measures 2.8 × 3.5 mm, a 5050 chip 5.0 × 5.0 mm. Package size affects output per chip, heat, and density options. It is a size code, not a quality grade.
2835 vs 5050 — which should I choose?
2835 for most single-color work — it runs denser (up to 480 LEDs/m), cooler, and more efficient, up to 190 lm/W in our high-efficacy series. 5050 puts more output on each chip, useful at low densities like 30–60 LEDs/m. Both carry the same CRI tiers and warranty.
Is the 190 lm/W figure for the strip or for the LED?
It is the figure for the whole strip. UT-S2835-128-HE lists 190 lm/W at 2.9 W/ft, which is about 550 lm/ft. When a sheet lists efficacy, multiply by watts per foot to compare lumens per foot.
How many amps does LED strip draw?
Divide watts per meter by voltage, then multiply by run length. Example: UT-S2835-120 at 14.4 W/m on 24V draws 0.6 A per meter — a 5 m run pulls 3 A. Keep the connected load at or below 80% of the driver's rating.
Are SMD LED strips dimmable?
Yes — every single-color series dims smoothly to below 1% with a compatible driver. Pair with TRIAC, 0-10V, or DALI dimmable drivers depending on the control system; we match the driver at quote time. All pairings are verified flicker-free before shipment.
How many strips can one power supply run?
Total the wattage of every connected run and keep it at or below 80% of the supply’s rating. A 150 W driver safely runs about 8 m of 14.4 W/m strip. We size drivers per circuit from our Drivers, Controllers & Connectors line at quote time.
How long can a single run be?
49 ft (15 m) on the 48V series and 65 ft (20 m) on the 24V constant-current series from a single feed — see the Long-Run series. Standard 12V/24V runs are 16 ft (5 m) per feed before voltage drop becomes visible.
What is SMD LED strip?
SMD LED strip is tape with surface-mounted LED packages soldered at a fixed pitch along a flexible PCB, as opposed to COB strip where bare chips sit under one continuous phosphor layer. The package name, 2835 or 5050 for example, is the chip's size in millimeters, and the pitch and package together set the output, the dot visibility and the cut interval.
Spec your SMD project
Send your project details — an engineer replies with matched strip, drivers, and documentation.
We typically respond within 24 hours. No spam, ever.