COB

SCOB vs COB LED strip compared on our spec tables: 130–140 lm/W vs ~90, driver count per run, unlit and lit looks, bending, color bins and channel fit.

Reception desk LED strip lighting for hotels, clinics and offices: four strip positions, the ADA 36 in counter section, screen reflections, where drivers go.

Black PCB LED strip hides in a dark ceiling only if the channel, cover, end caps and leads are dark too. What the board changes, cover choice, and the build.

LED strip in a channel or a linear fixture? Six things move to the contractor with the swap: listing, photometrics, lengths, heat, service and line items.

Turn LEDs per foot into pitch, check it against diffuser depth, and see how density sets cut increments, dark stubs, watts and heat on SMD and COB strip.

How deep a backlit onyx, stone or acrylic panel must be for an even glow: vendor depth figures, a watts-per-square-foot formula, COB choice, heat, access.

Plan recessed and trimless linear LED strip for offices: channels, opal covers, run, joint and feed math for a 100 ft slot, dimming zones and ceiling fit.

Where to place LED strip on retail shelves and cases, how to keep dots out of the glass, which CCT and CRI suit each department, and how to size drivers.

Side-emitting strip lights from its edge, S-bend turns flat around curves, ultra-narrow fits 3 to 5 mm slots. What each gives up and where each belongs.

CSP vs COB LED strip: where dots show, what the CSP type tests cover, and why no spec compares failure rates. Cut lengths, runs and CRI by model, then pick.

Pick CRI 90, 95 or 98 LED strip by what it lights. Check R9 and TM-30, weigh the efficacy cost with real models, and settle the tier on a sample board.

Spec COB where anyone can see the strip or its reflection, SMD where the cove hides it. Compare efficacy, CRI and run length with real models, plus other uses.