Outdoor

Will LED strip survive a sauna? Heat and water are separate ratings, the lowest part sets the limit, joints and drivers stay outside. See our +221 °F series.

Where LED strip goes in a spa or commercial wet area: dry, damp, wet and underwater zones, IP67 and IP68 models, the IP65 connector limit and driver location.

Seal a cut end of IP67 LED strip so it stays dry: cut on the mark, dry the end, fill a matching cap with the right sealant, seal the lead and let it fully cure.

Restaurant and bar LED strip by zone: back-bar shelves, bar die, service well, booths, signage and patio, with the product, CCT, IP rating and control for each.

IP68 is an ingress test, not a pool listing. What LED strip in pools and fountains needs: an underwater listing, a compliant supply, sealed joints and distance.

Case study: about 10,500 ft (3,200 m) of DMX512 RGBW top-bend LED neon flex outlines the hexagon glass canopy of the Crystal Corridor in Doha, Qatar.

Soffit and eave LED strip that lasts outdoors: damp vs wet zones, IP67 strip in screwed channel, sealed ends and joints, and a 240 ft roofline feed plan.

IP67 is a number, not a construction. Compare top coat, sleeve and full silicone tube, why every cut end is the weak seal, and how to choose by exposure.

Case study: about 16,400 ft (5,000 m) of top-bend silicone LED neon flex in 2700K, 4000K, 5700K and RGBW traces the curved facade of a Dubai logistics park.

Case study: about 2,000 ft (600 m) of blue and yellow IP68 PU LED neon flex outlines a cruise ship's exterior contours, supplied in phases.

IP68 is a lab test, not a wet location rating. See what IP65, IP67 and IP68 test, what the inspector checks, and how to spec connectors, drivers and cuts.